v1.6.0 - 2026-10-31

中文

新增

• 副卡数据通道入口：在网络通道页启用、停用非默认数据卡通道，区分激活进程和网络实际状态，并提供请求与兼容两种方式。卡片沿用网络通道图标样式，摘要显示 SIM、副卡启用状态和当前操作；网络验证状态、SIM 详情、完整说明与激活方式可展开查看，滚动离屏后保留状态与展开设置。
• 按 SIM 保存分流目标：可识别的 SIM 使用设备内稳定标识，网络重建后重新解析到当前接口；身份无法匹配时提示重新选择，保留旧接口规则兼容。
• 配置备份 v3：保存 SIM 分流与场景目标，继续读取 v1/v2 备份；跨设备导入时提示无法匹配的 SIM。

修复

• 双 Wi-Fi 界面排版：激活状态移至硬件支持卡片右下角；附近网络的频段、推荐/冲突和已保存标签可自适应换行，长 SSID 与连接按钮不再挤压标签。
• 双 Wi-Fi 英文显示：补齐连接、诊断、状态、冲突、频段和信号等界面与运行时提示的英文文案。
• 双 Wi-Fi 控制与支持详情：可完整停用并发模式、停止应用自动重连，保留已保存网络和原自动重连偏好；停用后刷新附近网络状态，避免断开的网络仍显示为副 Wi-Fi。热点仍使用副 Wi-Fi 时阻止停用。连接方式选择收纳在支持详情的“系统定制环境与方案”项中；支持状态默认简要显示，诊断状态标签位于对应说明下方。
• 多蜂窝网络分流：系统默认网络与 DNS 使用当前生效的场景及在线通道配置；切换目标通道或同一接口的网络重建后刷新对应应用的网络选择。
• 蜂窝 IPv6 回退：目标通道丢失 IPv6 路由时阻止流量静默转入另一张 SIM，恢复路由后可继续使用原通道。
• 副卡通道停用：正常停用时先释放网络请求并恢复修改前的双卡状态，再退出后台进程。

English

Added

• Secondary cellular controls: Enable or stop the non-default data SIM channel from the channels tab, distinguish process state from network availability, and choose request or compatibility mode. Reuse the network-card icon style; show the SIM, enabled state and current action in the summary; expand for network validation, SIM details and full notes. Preserve state and expanded settings after scrolling offscreen.
• SIM routing targets: Use device-scoped identities for identifiable SIMs and resolve the current interface after network recreation. Prompt for reselection when identity cannot be matched; retain legacy interface assignments.
• Configuration backup v3: Preserve SIM assignments and scenario targets while reading v1/v2 backups. Report unmatched SIMs when importing on another device.

Fixed

• Dual Wi-Fi layout: Move readiness status to the bottom-right of the capability card. Let nearby-network band, recommendation/conflict and saved labels wrap; constrain long SSIDs and action labels so they do not crowd the tags.
• Dual Wi-Fi English: Complete English text for connection, diagnostics, status, conflicts, bands, signal and runtime messages.
• Dual Wi-Fi controls and support details: Add a full shutdown for concurrency mode and app auto-reconnect while keeping the saved network and auto-reconnect preference. Refresh nearby network state after shutdown so a disconnected network is no longer labeled as secondary Wi-Fi. Block shutdown while the hotspot still uses secondary Wi-Fi. Place connection method choices under System Environment and Scheme in support details; keep the summary compact by default and place diagnostic status tags below their descriptions.
• Multiple cellular networks: Use effective scenario and online-channel assignments for per-app default networks and DNS. Refresh selection when the target changes or its Network instance is replaced on the same interface.
• Cellular IPv6 fallback: Prevent traffic from silently using another SIM when the selected channel loses its IPv6 route. Resume using the selected channel when its route returns.
• Secondary cellular shutdown: Release network requests and restore the previous dual-SIM state before the background process exits during normal shutdown.

v1.5.0 - 2026-10-27

中文

新增

• 个人热点出口选择：可选择蜂窝网络、副 Wi-Fi 或系统默认网络作为热点上游；新增控制卡片，展示热点频段、实际出口和模块状态，并支持提前设置出口。
• 热点通道识别：展示热点下行接口及其属性，并从应用分流和场景目标中排除这些接口。
• VPN 通道详情：展示 VPN 创建应用、隧道 IP 和底层承载网络。

变更

• 配置备份 v2：支持导入预览和按类别恢复，覆盖应用分流、场景选择、网络策略、热点出口、双 Wi-Fi 偏好、外观和测速节点，兼容 v1 文件。
• LSPosed 作用域：除系统框架外，热点出口功能还需启用设备对应的 NetworkStack / Tethering 作用域。
• 双 Wi-Fi 状态概览：主界面直接展示主、副 Wi-Fi 的网络名称与频段。
• VPN 分流目标：VPN 保留为可选目标；分应用选择器限制 VPN 所属应用及部分常见 VPN 客户端选择 VPN 通道，减少路由冲突。

修复

• 双 Wi-Fi 连接与断开：修复取消或断开后仍自动连回、重复重连和旧通知干扰新连接的问题；连接失败或取消后清理未完成的副网连接。
• 小米副 Wi-Fi 重连：修复重复请求导致连续断开、重连失败的问题。
• 双 Wi-Fi 服务稳定性：修复断开连接后偶发的前台服务超时崩溃。
• 保存网络保护：日常连接与断开不再删除系统保存网络；AOSP 方案只释放本模块登记的连接请求。
• AOSP 连接入口：已保存的加密网络无需在应用内提供密码；未保存网络可直接打开系统 Wi-Fi 设置。修复手动连接方案被覆盖和旧密码弹窗残留的问题。
• 双 Wi-Fi 状态显示：连接、断开后的诊断信息及时反映当前链路状态。
• 配置导出与恢复：导出不包含副 Wi-Fi 密码；完整恢复手动模式和所选场景。清空分流或分类导入保留其他设置；备份失败时停止导入，写入失败时尝试恢复原配置并报告错误。
• 开机规则恢复：修复所有目标通道离线时修改或导入规则，导致下次启动仍恢复旧配置的问题。
• 热点出口切换与回退：修复蜂窝出口误选、目标网络恢复后未重新选择，以及停止共享后未恢复原配置的问题。
• Pixel 兼容性：修复部分 Pixel / Google 网络组件下的网络选择和热点出口兼容问题。
• 热点状态与响应：修复模块加载状态误报、实际出口显示滞后及操作卡顿；设置失败时显示读取到的实际值。
• 界面显示：修复浅色主题状态栏图标对比不足、VPN 详情占位符和深色卡片边框问题，改善长网络名称的显示。

English

Added

• Hotspot upstream selection: Choose Cellular, Secondary Wi-Fi or System Default. A new card displays the hotspot band, actual upstream and module status, and supports choosing an upstream before starting the hotspot.
• Hotspot channel recognition: Display hotspot downlinks and their properties, and exclude them from app routing and scenario targets.
• VPN channel details: Display the VPN creator app, tunnel IP and underlying networks.

Changed

• Configuration backup v2: Preview imports and restore selected categories covering app routing, scenario selections, network policies, hotspot upstream, dual Wi-Fi preferences, appearance and test endpoints. Existing v1 files remain supported.
• LSPosed scope: Hotspot upstream selection also requires the NetworkStack / Tethering scopes available on the device, alongside the system framework.
• Dual Wi-Fi overview: Show the primary and secondary network names and bands on the main screen.
• VPN routing targets: VPN networks remain selectable. App assignment pickers restrict VPN owner apps and some recognized VPN clients from selecting VPN channels to reduce routing conflicts.

Fixed

• Dual Wi-Fi connection and disconnection: Fix unwanted reconnection after cancellation or disconnect, overlapping retries and old notifications affecting new connections. Clean up unfinished secondary connections after failure or cancellation.
• Xiaomi secondary Wi-Fi reconnection: Fix duplicate requests causing repeated disconnects or failed reconnections.
• Dual Wi-Fi service stability: Fix an occasional foreground-service timeout crash after disconnecting.
• Saved network protection: Preserve system-saved networks during normal connections and disconnections. The AOSP scheme releases only connection requests recorded by this module.
• AOSP connection entry: Connect to saved encrypted networks without an in-app password and open system Wi-Fi settings for unsaved networks. Honor manually selected schemes and clear obsolete password dialogs.
• Dual Wi-Fi status: Keep diagnostics consistent with the current connection state after connecting or disconnecting.
• Configuration export and restore: Omit secondary Wi-Fi passwords from exports and restore manual mode and all selected plans. Preserve other settings when clearing routing or importing selected categories. Abort import if backup fails; attempt to restore the original configuration and report write failures.
• Boot rule recovery: Fix stale configuration being restored at the next boot after editing or importing rules while all target channels are offline.
• Hotspot switching and fallback: Fix incorrect cellular selection, missing reselection when a target returns and failure to restore the original configuration when sharing stops.
• Pixel compatibility: Fix network selection and hotspot upstream compatibility with some Pixel / Google network components.
• Hotspot status and responsiveness: Fix incorrect module status, stale upstream labels and unresponsive controls. Show the actual setting when an update fails.
• UI display: Fix low-contrast status bar icons in light mode, VPN detail placeholders and dark card borders. Improve long network-name display.

v1.4.1

中文

• 热点与双 Wi-Fi 射频互斥与联动：
  • 支持检测本机个人热点（SoftAP）状态与频段，避免副 Wi-Fi 与热点占用相同射频产生冲突。
  • 热点关闭后，若开启了自动重连，会自动尝试恢复连接副 Wi-Fi。
• 小米 / HyperOS 双 Wi-Fi 连接优化：
  • 优化小米/HyperOS 机型连接副 Wi-Fi 的逻辑，协同系统 SlaveWifiService，避免发起连接时占用主 Wi-Fi 通道导致主连接断开或连接超时。
  • 修复小米设备上部分 Wi-Fi 扫描结果信号强度显示为 -99 dBm 的问题。
• 主副 Wi-Fi 防冲突与断开逻辑完善：
  • 限制不能将当前已连的主 Wi-Fi 作为副 Wi-Fi 连接。
  • 优化副 Wi-Fi 断开流程，清理残留的网络请求与配置，避免偶发自动重连。
• UI 与细节调整：
  • 优化主界面 Wi-Fi 信号图标显示效果。
  • 修复热点提示卡片在深色模式下的边框颜色显示问题。

English

• Personal Hotspot Compatibility:
  • Detect active SoftAP hotspot state and frequency band to avoid concurrent radio conflicts on the secondary Wi-Fi.
  • Automatically reconnect secondary Wi-Fi after Hotspot is turned off (when auto-reconnect is enabled).
• Xiaomi / HyperOS Compatibility:
  • Improve secondary Wi-Fi connection flow on Xiaomi/HyperOS via SlaveWifiService, preventing primary Wi-Fi disconnections and connection timeouts.
  • Fix an issue where some Wi-Fi scan results showed -99 dBm on Xiaomi devices.
• Connection & Teardown Improvements:
  • Prevent connecting to the active primary Wi-Fi as secondary Wi-Fi.
  • Clean up residual requests and configurations when disconnecting secondary Wi-Fi to prevent unintended auto-reconnection.
• UI Adjustments:
  • Refine main screen Wi-Fi signal icon style.
  • Fix card border color in dark theme when hotspot is active.

中文

• 双 Wi-Fi 助手（STA + STA 并发管理）：新增独立管理面板，支持副 Wi-Fi 的扫描、认证连接、状态诊断与断开全生命周期控制，实时检测双频硬件能力与网卡链路信息。
• 多方案自适应分层连接架构：支持智能自动（AUTO）、小米/HyperOS 专用（XIAOMI_SLAVE）、AOSP/Pixel 标准（AOSP_OVERLAY）与通用 Root 直连（ROOT_DIRECT）；通用模式借助 SYSTEM_UID 特权通道穿透定制 ROM 限制，实现免 Overlay 直连。
• 同名 Wi-Fi（SSID）跨频段独立隔离：彻底解决 2.4G / 5G / 6G 同名 Wi-Fi 被合并的问题，各频段独立呈现信号与状态，支持针对特定频段精准发起连接。
• 可用 Wi-Fi 详情与连接诊断：点击 Wi-Fi 卡片展开详情面板，直观查看物理 MAC (BSSID)、频段信道、信号强度、加密套件、凭据状态及并发评估；引入动态信号图标与多层级智能排序。
• 运行诊断日志全面扩充与导出分享：大幅丰富系统运行与诊断日志信息，新增双 Wi-Fi 硬件并发能力与芯片参数、各通道实际 DNS 与系统全局私有 DNS (DoT) 状态、各接口默认网关策略路由表，并拓宽 Logcat 抓取深度至 50 行覆盖 Wi-Fi 协议栈；支持一键将日志导出为文本文件或通过系统面板快速分享反馈。
• 网络限制清理与体验优化：新增一键清除底层 BSSID 惩罚黑名单功能；修复双 Wi-Fi 软硬件卡片背景透明度导致的灰色边框异常，优化卡片手势层级与文本表述。

English

• Dual Wi-Fi Manager (STA + STA Concurrency): Added a dedicated manager for scanning, connecting, diagnosing, and disconnecting the secondary Wi-Fi, alongside real-time hardware concurrency and link status tracking.
• Multi-tier Adaptive Architecture: Introduced 4 connection schemes: AUTO, XIAOMI_SLAVE, AOSP_OVERLAY, and ROOT_DIRECT; the root scheme leverages a privileged SYSTEM_UID channel to bypass OEM restrictions without requiring overlays.
• Independent Cross-band Isolation for Identical SSIDs: Fully disambiguates multi-band Wi-Fi sharing the same SSID (2.4G / 5G / 6G) into isolated entries with independent signal tracking and connection states.
• Wi-Fi Details & Diagnostics: Tapping any Wi-Fi card opens an interactive sheet displaying BSSID, band, channel, signal strength, security suites, credentials, and concurrency readiness, with dynamic signal icons and prioritized sorting.
• Enhanced Diagnostic Log, Export & Share: Substantially expanded diagnostic logs to include Dual Wi-Fi hardware concurrency and chipset specs, per-channel upstream DNS and Private DNS (DoT) status, interface default gateways, and an expanded 50-line Wi-Fi stack logcat trace; added SAF file export and system share sheet integration for quick feedback.
• Blocklist Reset & UI Polish: Added a one-click action to clear system-level BSSID temporary penalties; fixed grey border rendering artifacts on hardware cards and refined gesture handling.

v1.3.0

中文

• 通道故障自动降级 (Auto Failover)：当被指派的网络通道离线、断开连接或丢失默认网关时，其绑定的应用会自动即时回退至系统默认网络，避免应用陷入无网死锁。
• 主动外网连通性校验 (204 探针)：通道建立或恢复时，可选通过该通道向极轻量 204 探针发起无数据体请求，精准识别欠费、断网 Wi-Fi 或待认证门户（Captive Portal）；纯内网环境可关闭。
• 网络恢复/切换防抖延迟：统一通道恢复回切与情景策略重新激活的防抖时间窗口（支持 1s / 2s / 3s / 5s / 8s 可选，默认 3s），等待链路稳定与 DHCP 握手完成，杜绝边缘弱信号区的频繁颠簸与连接横跳。
• 安全加固 (Security Hardening)：
  • 严格限制开机与动态恢复广播的接收权限（signature 签名级别防护），阻断未授权应用假借恢复之名滥发广播。
  • 收紧规则持久化缓存与诊断日志文件权限（仅属主读写 0600 / 内部私有存储 MODE_PRIVATE）。
  • 设置页显式提供「DNS 随指派通道解析」启闭开关，便于与全局加密 DNS (DoT / DoH) 灵活共存。
• 界面体验精简：设置页全面优化视觉呼吸感，剔除各卡片多余堆叠的二级提示小字，将关键限制与功耗提示提炼融入单行描述，交互更加清爽直观。

English

• Auto Failover on Channel Outage: When an assigned channel disconnects, drops offline, or loses its default route, bound apps automatically fall back to the system default network immediately to prevent network dropouts.
• Active Internet Connectivity Validation (204 Probe): Optionally validates real internet connectivity upon channel connection or recovery via lightweight HTTP 204 probes (0-byte body) to accurately detect captive portals or offline Wi-Fi (can be disabled for pure LAN environments).
• Unified Network Recovery Hold-off Delay: Synchronizes anti-flapping debounce delay across channel failover recovery and contextual scenario activation (selectable: 1s / 2s / 3s / 5s / 8s, default: 3s) to prevent route flapping at weak signal boundaries.
• Security Hardening:
  • Enforced signature-level permission guards on boot and dynamic restoration broadcast receivers to prevent unauthorized spoofing.
  • Hardened file permissions on rule cache and diagnostic logs (0600 / MODE_PRIVATE).
  • Added toggle in Settings for transparent per-channel DNS redirection.
• Streamlined Settings UI: Cleaned up redundant secondary note captions and refined descriptions into clear, concise single-line headers.

v1.2.3

中文

• 场景方案在应用未运行时也生效：模块在 system_server 侧监听链路变化，仅在存在方案时唤醒应用重新评估
  （没有方案就保持休眠）；应用进程被杀时同样会切换。
• 方案支持编辑覆盖应用（编辑态下的指派写入方案而不是默认方案）、改名与触发条件、调整顺序
  （顺序即判定优先级）。
• 配置导出与导入：一份 JSON 文档携带分应用指派（含分身空间）、全部场景方案与相关设置；可写入
  Download 或复制到剪贴板，也能从两者导入。导入是整体替换，但会先备份当前配置并报告跳过了多少项，
  因此指向本机不存在应用或通道的条目不会静默改动任何东西。方案列表里每个方案各自一层容器；Wi-Fi 条件
  未选网络时会明确标注（这种方案不会自动命中）。
• 多个方案可同时生效：命中多个方案时不再只取一个，而是按优先级依次叠加（后一个可改写前一个给某应用设的通道，
  也能用「系统默认」把应用移出分流）。同一个应用被多个方案设定时优先级高的生效，被改写的那一个会在方案行上标出。
• 策略绑定网络而不是网卡：在方案里指派 Wi-Fi 链路时保存的是 ssid:<名称>，每次同步解析成当时的接口 ——
  哪张网卡是 wlan0 在运行中会变。网络不在线时保持原有指派，而不是指向一条不存在的链路。
• 手动模式：抽屉里新增「自动 / 手动」两个模式。「手动」下所有触发条件都不生效，只应用手动开启的方案，
  且可同时开启多个（同样按优先级叠加）；点一个方案不会取消其它方案。
• 抽屉里应用/取消不再关闭抽屉，方便连续操作；配置备份卡片移到「模块与路由状态」之后，导入改为系统文件选择器
  （不必输入路径，也不需要 root）。

English

• Scenario plans now apply while the app is not running. The module watches link changes inside
  system_server and wakes the app to re-evaluate, but only while a plan exists - without one the app stays
  asleep. The app's own callback is no longer the only trigger.
• Plans can be re-edited (in edit mode assignments go into the plan instead of the default plan),
  renamed, have their condition changed, and be reordered - the stored order is the priority order.
• Configuration export and import. One JSON document carries the per-app assignments (including clone
  spaces), every plan and the routing settings; it can be written to Download or copied to the clipboard,
  and imported from either. Import replaces the configuration, but backs the current one up first and reports
  what it skipped, so entries pointing at apps or channels that are missing here cannot silently change
  anything. Each plan in the sheet now sits in its own surface, and a Wi-Fi condition with no network chosen
  says so, because such a plan can never match on its own.
• Several plans can apply at once. Matching plans now layer in priority order instead of only the first one
  winning: a later plan can re-route an app an earlier one set, or take it out of routing with default. When
  more than one active plan sets the same app the higher-priority one wins, and the overwritten plan is labelled
  on its row instead of being dropped silently.
• A plan binds to the network, not to the interface. Assigning a Wi-Fi link inside a plan stores
  ssid:<name>, resolved to whatever interface that network is on at sync time, because which interface is
  wlan0 changes while the device runs. A network that is not up leaves the previous assignment alone.
• Manual mode. The sheet offers Automatic / Manual: in Manual no condition is evaluated at all, only the
  plans switched on by hand apply, and several can be on at once, layered by priority. Switching one plan on
  never cancels another.
• Applying or cancelling a plan no longer closes the sheet, the backup card moved below the module state card,
  and importing uses the system file picker instead of a typed path.

v1.2.2

中文

• 场景方案：给应用指派通道后，可以把它保存为一个方案（名称 + 触发条件）。命中时，方案只覆盖它涉及的应用，
  其余应用保持默认指派。触发条件支持 Wi-Fi 名称（从当前已连接的网络里直接点选）、双 Wi-Fi 在线、
  仅蜂窝、始终与仅手动；多个方案同时命中时按优先级取第一个，也可以在列表里手动指定方案
  （此时忽略条件）。方案还能把某个应用移出分流（覆盖为「系统默认」）。分流规则页顶栏显示当前生效方案，
  点击即可切换；诊断快照会写出当前方案与命中原因。

English

• Scenario plans. Once apps are assigned to channels, that assignment can be saved as a plan (a name plus a
  condition) which overrides the apps it mentions when the condition matches, while every other app keeps the
  default assignment. Conditions: a Wi-Fi name picked from the networks connected right now, two Wi-Fi
  links, cellular only, always, or manual only. When several plans match, the lowest priority
  wins, and a plan can also be pinned by hand (which ignores its condition). A plan may also put an app back
  on the system default. The routing screen shows the active plan in its top bar, and the diagnostic
  snapshot names the plan and why it matched.

v1.1.1

中文

• 下载体积大幅缩小：release 构建启用 R8，dex 由约 42 MB 降到约 2.4 MB，APK 由约 43 MB 降到约 3.2 MB。
  R8 此前一直未启用，只是被 APK 压缩掩盖了 —— 直到 minSdk 升到 30、dex 不再压缩，下载体积才翻了 3.5 倍。
  proguard-rules.pro 已保留 hook 入口、Provider、数据模型与 LibXposed；压缩后重新上机验证：两族 hook 均正常
  安装，应用无类错误。
• Wi-Fi 频段与信道显示：每个 Wi-Fi 通道显示频段与信道（如 5 GHz · ch 36），由连接频率推导 —— 因为
  哪张网卡落在哪个频段会在运行中变化。
• 最低版本明确为 Android 11：模块所 hook 的接口（含 getMobileDataPreferredUids）自 Android 11 起才存在，
  因此 minSdk 提到 30，不再安装到注定无法工作的旧版本上。真机验证的是 Android 16 与 17。
• README 补充了管理器会读取的模块元数据（作用域、LibXposed API 范围）、干净的卸载方式，以及"已验证 / 未验证"
  的明确边界。

English

• Much smaller download. The release build is minified with R8 now: the dex drops from ~42 MB to
  ~2.4 MB and the APK from ~43 MB to ~3.2 MB. R8 had always been off, which APK compression used to
  hide — until minSdk reached 30, where the dex is stored uncompressed and the download tripled. The
  hook entry point, the provider, the models and LibXposed are kept by proguard-rules.pro, and the
  module was re-verified on device after minifying (both hook families install, no class errors).
• Wi-Fi band and channel are shown for every Wi-Fi channel (for example 5 GHz · ch 36), derived
  from the connection frequency — useful because which interface sits on which band changes while the
  device is running.
• Android 11 is now the stated minimum. The interfaces the module hooks, getMobileDataPreferredUids
  among them, only exist from Android 11 on, so minSdk is 30: the APK no longer installs on releases
  where it could only ever fail. Android 16 and 17 are the versions verified on device.
• The README now documents the module metadata the manager reads (scope, LibXposed API range), how to
  uninstall cleanly, and exactly what has and has not been verified.

v1.1.0

中文

• 分应用 DNS 随通道归属：Android 是按默认网络选择解析器的，与内核把报文路由到哪里无关，因此被指派
  的应用可能去查只在另一条链路上可达的解析器，或继续查 VPN 隧道内的解析器。现在会把被指派 UID 的
  UDP/TCP 53 改写到该通道自己的解析器（nat 表专用链 MULTIROUTE_DNS）；853（DoT）刻意不改写，
  DoH 本身是普通 HTTPS、天然跟随路由。开机脚本只清链，应用运行后再用当前网络的解析器补上，避免旧地址弄坏解析。
• 外观与语言设置：主题（跟随系统 / 浅色 / 深色，带渐变过渡）、Material You 动态取色，以及按应用语言
  （跟随系统 / 简体中文 / English）。界面已全量英文化。
• 小米双 Wi-Fi hook 改为按需安装：息屏保活开关关闭时不再安装 hook，模块完全不碰 ROM 的 Wi-Fi 代码；
  打开开关会即时安装（无需重启）。开关已注明仅小米可用。
• 蜂窝首选 UID 记账：取消指派或清空规则时，只回收本应用自己加进平台列表的 UID。
• 诊断快照包含规则生效对照（配置了什么 vs 内核里实际有什么）与开机恢复日志，一键复制即可转交。
• 内部清理：通道标签与出口结果改为语言中立的值（图标与成败判断不再依赖显示文本），41 个单元测试覆盖纯逻辑。

English

• Per-app DNS now follows the assigned channel. Android picks the resolver from the default network
  regardless of where the kernel routes the packets, so an assigned app could query a resolver that was
  only reachable over a different link — or keep querying one inside a VPN tunnel. Queries of assigned
  UIDs are redirected to their own channel's resolver; the boot script flushes that chain and the app
  re-applies it with the resolvers of the current network, so a stale address can never break resolution.
• Appearance and language settings. Theme (follow system / light / dark) with a crossfade instead of a
  restart, a Material You toggle, and language selection (follow system / 简体中文 / English) through the
  platform per-app locale. The UI itself is now fully translated.
• Xiaomi dual-Wi-Fi hooks are installed on demand. They are no longer installed at boot unless the
  screen-off keep-alive is on, so the module stays out of the ROM's Wi-Fi code while the feature is unused;
  switching it on installs them immediately, without a reboot. The switch is labelled as Xiaomi-only.
• Cellular preferred-UID bookkeeping. Unassigning an app, or clearing every rule, now takes back only
  the UIDs this app added to the platform's preferred-mobile-data list.
• Rule effectiveness and the boot-recovery log are part of the copyable diagnostic snapshot, so a
  report shows what is configured, what the kernel actually holds, and what the boot script did.
• Internal clean-ups: channel labels and egress results are language-neutral values now (icons and
  success/failure no longer depend on display text), with 41 unit tests covering the pure logic.

v1.0.0

中文

• 分应用网络通道：在内核层用策略路由（ip rule，IPv4 与 IPv6）落实，每个应用走被指派的链路。
• 分身独立配置：厂商分身空间（如小米 XSpace，用户 999）与工作资料作为独立条目列出，分身与主安装可走不同通道。
• 接口动态发现：不写死网卡名；主 Wi-Fi、副 Wi-Fi（双 WLAN）、蜂窝与以太网均支持。
• 按通道的局域网直连放行：由各链路自身的直连前缀生成，被指派到其他通道的应用仍可访问内网设备。
• 开机自动恢复：生成的 service.d 脚本、模块的唤醒广播、应用自身的网络回调三重互补；重启后设备仍处于
  锁屏状态时，root 脚本是唯一能恢复规则的路径。
• system_server 内的 hook：让应用可见的网络状态与指派保持一致，并在小米 ROM 上让副 WLAN 链路在息屏后保持在线。
• 精准模块状态：明确区分「已激活 / hook 缺失 / system_server 是旧构建（需重启）/ 状态记录过期」。
• 出口诊断：按通道做公网出口 IP 探测，内置 HTTPS 预设并支持自定义地址。
• 首次发布。

English

• Per-app network channels, enforced in the kernel with policy routing (ip rule, IPv4 and IPv6).
• Independent configuration for cloned apps — OEM clone spaces (e.g. Xiaomi XSpace, user 999) and work
  profiles are listed separately, so a clone and its primary install can use different channels.
• Dynamic interface discovery — no hard-coded interface names; primary Wi-Fi, secondary Wi-Fi
  (dual Wi-Fi), cellular and Ethernet are all supported.
• Per-channel LAN bypass, generated from each link's own on-link prefixes, so intranet devices stay
  reachable from apps assigned elsewhere.
• Automatic boot recovery — a generated service.d script, a wake-up broadcast from the module and the
  app's own network callback cover each other; the root script is what restores rules on a device that is
  still locked.
• Hooks inside system_server keep the app-visible network state consistent with the assignment, and
  keep the secondary Wi-Fi link alive across screen-off on Xiaomi ROMs.
• Precise module status — reports activated / hooks missing / outdated system_server build (needs a
  reboot) / stale record instead of a single vague flag.
• Egress diagnostics — per-channel public-IP probe with HTTPS presets or a custom endpoint.
• Initial release.

Full Changelog: 10063-1.2.2...10094-1.3.1-beta.1

v1.2.1

中文

• 发版体积门禁：APK 超过 20 MB 时发布直接失败。1.1.1 曾以 43 MB 发布出去 —— 原因是 R8 一直没启用，
  而 minSdk 升到 30 后 dex 不再被压缩；启用 R8 后约 3 MB，这道门禁可拦住同类回归。应用本身无功能变更。

English

• A release now fails if the APK exceeds 20 MB. The 1.1.1 release went out at 43 MB because R8 had
  never been enabled and minSdk 30 stopped the dex from being compressed; it is ~3 MB since. The guard
  makes a regression like that impossible to publish unnoticed. No functional change in the app itself.

v1.2.0

中文

• 包名改为 io.github.linoleic.multiroute：模块仓库只接受"作者能证明所有权"的包名命名空间，而
  com.multiroute 需要 multiroute.com。Android 会把它视为另一个应用，因此安装本版前必须先卸载 1.1.x
  （分流配置不会迁移），并在 LSPosed 管理器中启用新包名条目（它会作为新模块出现）。代码命名空间不变
  （hook 与模块元数据完全一致）；唤醒广播、应用内 hook 判定与镜像目标全部改为从构建取值，不再硬编码包名。

English

• The application id changed to io.github.linoleic.multiroute. The module repository only accepts a
  package namespace its author can prove ownership of, and com.multiroute would require
  multiroute.com. Android treats the new id as a different app, so uninstall 1.1.x before installing
  this one (assignments are not carried over) and enable the new package in LSPosed Manager, where it
  appears as a new module entry. The code namespace is unchanged, so the hooks and the module metadata
  are identical; the wake-up broadcast, the in-app hook check and the repository mirror all derive the id
  from the build now instead of hard-coding it.